May 3rd is the fourth day of the May 1st holiday.

　　While enjoying the holiday life

　　Don’t forget.

　　The 5th to 7th days are working days.

　　Special reminder

　　Go to work on May 7 (Saturday)

　　next

　　There are also these changes to be noted.

　　After May 4th.

　　High speed is no longer free.

　　During the "May 1" period

　　Freeways are exempt from seven or less seats.

　　Toll for small passenger vehicles

　　Specific free time period

　　From 00: 00 to April 30th.At 24: 00 on May 4,

　　The time when the vehicle leaves the exit toll lane shall prevail.

　　Rainy days will leave.

　　High temperature in many places returns to 30℃

　　The May Day holiday begins with a rainy day.

　　But it began to clear up a few days after the holiday.

　　The temperature will rise in most parts of China.

　　The warming in the north is even stronger.

　　The highest temperature in parts of North China and other places can reach 33℃

　　The degree of local heating is rare in early May.

　　Multi-destination return is required within 48 hours

　　Negative proof of nucleic acid

　　The May Day holiday is coming to an end. What are the epidemic prevention and control policies for returning to work in various places?

　　Beijing: You can only board the plane with the negative nucleic acid certificate within 48 hours and the green code of "Beijing Health Treasure".

　　When returning to Beijing, you must hold the negative certificate of nucleic acid test within 48 hours and the green code of "Beijing Health Treasure". Before arriving in Beijing or within 12 hours after arriving in Beijing, you must report to your community (village), unit, hotel, etc. through the small program of "Jingxin Help".Units in Beijing should urge employees to do another nucleic acid test within 48 hours before returning to work.

　　Since May 5, commuters must have a negative nucleic acid test certificate within 48 hours when they enter Beijing for the first time.After that, every time I return to Beijing, I will hold the negative certificate of nucleic acid test within 7 days and the green code of "Beijing Health Treasure". Non-green code personnel are strictly prohibited from entering or leaving Beijing.

　　Shanghai: Don’t come to Shanghai unless necessary.

　　Don’t come to Shanghai unless necessary. All personnel returning from Shanghai must have a negative report of nucleic acid test within 48 hours before arriving in Shanghai. Shanghai’s major railway stations and two airports are strictly inspected.For those who cannot provide relevant certificates, they must take samples at their own expense before leaving.

　　All people who come to Shanghai and return to Shanghai from or pass through the risk areas in the domestic epidemic should report to their village committees and units (or hotels) as soon as possible after arriving in Shanghai, and implement strict community health management for 14 days.Covid-19 nucleic acid detection was carried out four times (days 1, 4, 7 and 14).

　　Tianjin: implement "point-to-point" closed-loop office within 7 days of arrival in Tianjin.

　　Continue to implement the system of negative nucleic acid test certificate verification within 48 hours before arrival in Tianjin and "landing inspection" within 24 hours after arrival in Tianjin. We will continue to implement centralized isolation of people returning to Tianjin in high-risk areas, home isolation of people returning to Tianjin in county-level administrative areas where high-risk areas are located, and nucleic acid screening of people returning to Tianjin in land border port cities and employees in high-risk positions.

　　The work unit urged the staff to implement "peer-to-peer" closed-loop office within 7 days of arrival in Tianjin.It is forbidden to have dinner parties and go to public places where people gather.Nucleic acid detection was carried out on the 1 ST, 3 rd and 7 th day after arrival in Tianjin.

　　Shijiazhuang, Hebei Province: No nucleic acid detection will pop up within 48 hours.

　　All stone-returning personnel must have a negative nucleic acid test certificate within 48 hours. After "landing" nucleic acid detection,If it is more than 48 hours in the stone, it is necessary to conduct another nucleic acid test within 48 hours.

　　If the person who returns to stone fails to carry out nucleic acid detection within 48 hours, Hebei Health Code willA pop-up prompt appears.

　　Shenyang, Liaoning: nucleic acid detection was conducted once a day for the first 3 days.

　　All overseas returnees will be inspected upon landing,Perform nucleic acid detection once a day for the first 3 days, with an interval of not less than 24 hours;In the first three days, in principle, "two points (residence and work) and one line", do not take public transportation such as buses and subways, do not gather or have dinner.

　　Taiyuan, Shanxi: It is required to conduct nucleic acid testing immediately at the landing site.

　　All returnees from outside the province must have a negative nucleic acid test certificate within 48 hours.Samples should be taken immediately at the drop point,Conduct a nucleic acid test and report to the community (village) in advance.

　　Hohhot, Inner Mongolia: It must be reported within 12 hours before or after arrival.

　　All returning personnel from other places must report to the local community (village), unit or hotel within 12 hours before or after arrival.The advocacy unit requires employees to add nucleic acid within 48 hours before returning to work, and take home office before the negative test results come out.

　　Changchun, Jilin: It is required to contact the community (village) before returning.

　　Before returning to grow, you should take the initiative to contact the community (village) where you live, and return to grow with a negative nucleic acid test certificate within 48 hours.

　　Harbin, Heilongjiang: Those who arrive and return from border port cities in the province will be tested for nucleic acid again within 24 hours of landing.

　　Anyone who arrives in Kazakhstan from a border port city in the province shall check his past itinerary and residence history, and shall check the negative certificate of 48-hour nucleic acid test, and must have another nucleic acid test within 24 hours of landing. For those who fail to provide negative proof of nucleic acid test within 48 hours,Implement inspection on landing of major imports.

　　Hefei, Anhui Province: People returning from epidemic risk areas should be subject to centralized health observation.

　　Personnel returning to fertilizer in high-risk areas and epidemic-sensitive areas should be subject to centralized health observation. For special cases such as returning fertilizer for emergency medical treatment, you can continue to report through the 12345 hotline and open a green channel to ensure medical treatment and medicine purchase. People returning to fertilizer in low-risk areas will take free nucleic acid sampling with the negative nucleic acid test certificate within 48 hours, without waiting for the test results to come out.

　　Nanchang, Jiangxi: The "landing inspection" was implemented at the first time and place.

　　In the past 14 days, people in high-risk areas and local case reporting areas must report to the community (village) or unit 3 days in advance and carry negative proof of nucleic acid detection within 24 hours. The rest of the people from other provinces and other parts of the province who come back to Chang must report to the community or unit 3 days in advance, and hold the green code of "Changtong Code" or "Gantong Code", the green card of "Communication Travel Card" and the negative proof of nucleic acid test within 48 hours."Landing inspection" and "two inspections in three days" will be carried out at the first time and place after entering Chang.Before the nucleic acid test results come out, you must monitor your health at home or wait in a safe place.

　　Jinan, Shandong province: antigen testing will be carried out immediately after returning to China.

　　After the arrival of the foreign personnel, they should strictly check the health code, travel code and negative proof of nucleic acid test within 48 hours.And immediately carry out antigen testing, and after the result is negative, you can enter the economy.

　　Zhengzhou, Henan: It must be reported 3 days in advance.

　　Personnel returning from outside Zhengzhou (including drivers and passengers of trucks entering Zhengzhou from outside the province) shall3 days in advance in the "Zheng Hao Office" APP, "Yushiban" APP or "Alipay" APP for filing,Contact the community where you live, the work unit (school) or the receiving unit for filing matters. When entering Zheng, foreign returnees from the province and those from cities with local epidemic in the province must provide negative proof of nucleic acid test within 48 hours.

　　Wuhan, Hubei Province: Failure to implement the "three-day two inspections" will be given a "gray code"

　　People returning from other provinces must provide negative proof of 48-hour nucleic acid test and implement "three days and two tests", otherwise they will be given a "gray code". Wuhan is located at Tianhe Airport, Wuchang Railway Station, Wuhan Railway Station, Hankou Railway Station and 63 high-speed entrances.All of them are equipped with 24-hour free sampling site for nucleic acid detection.

　　Guangzhou, Guangdong: In principle, "two points and one line" in the first three days.

　　Those returning from outside the province will carry out nucleic acid detection for 3 days and 2 tests (at least 24 hours apart) and self-health monitoring for 11 days. In principle, the first 3 days will be "two points (residence and work) and one line". Those who have lived in the city where the high-risk area is located within 14 days must provide the green code of "health code" and the negative certificate of nucleic acid test within 48 hours.

　　Chongqing: You must stay at home before the nucleic acid test results of "three days and two inspections" come out.

　　All foreign personnel returning from Chongqing in the city must hold negative proof of nucleic acid test within 48 hours and green code of "health code" and have a nucleic acid test within 24 hours.Stay at home until the results of three days and two tests, including 24-hour nucleic acid test, come out.For those who come to and return from Chongqing in middle and high-risk areas,Centralized isolation medical observation was carried out for 14 days, during which at least 5 nucleic acid tests were carried out.

　　Chengdu, Sichuan: After scanning the Sichuan code, the temporary window will pop up, and the nucleic acid can be eliminated within 24 hours.

　　All personnel who come back to Rong should not only provide negative proof of nucleic acid test within 48 hours, check health code and communication itinerary card,It is also necessary to scan the "special place code for immediate inspection when entering Sichuan" through "Sichuan Tianfu Health Link" at each inspection point entering Sichuan.After scanning the "incoming code", a 24-hour temporary pop-up window will appear on the mobile phone. After receiving the information of the temporary pop-up, a nucleic acid test must be completed in Sichuan within 24 hours.(You can test nucleic acid at the nearest destination for free with temporary pop-up window and ID card)When the nucleic acid test result is negative, the temporary pop-up window will be automatically lifted after 24 hours.

　　Xi ‘an, Shaanxi: People in high-risk areas should be isolated for 14 days.

　　Returnees in the province will be released after temperature measurement, inspection of Shaanxi health code and big data travel code. Returnees from epidemic cities in the province should register information, check Shaanxi health code and big data travel code, and release them after on-site nucleic acid sampling. In low-risk areas outside the province, strictly check the negative certificate of nucleic acid test within 48 hours, communication big data travel card and "one code pass" in Xi’ an, conduct a nucleic acid sampling on the spot, register personal information and release it, and conduct another nucleic acid test on the third day after arriving in Xi’ an. For returnees in high-risk areas, the measures of centralized isolation for 14 days shall be implemented.

　　Urumqi, Xinjiang: There are different policies for entering and returning to Ukraine by railway, highway and plane.

　　Return to Ukraine by railway. Check the health code and the negative report of 48-hour nucleic acid test at the beginning of the train. Those who have no negative report of 48-hour nucleic acid test are not allowed to get on the train. Return to Ukraine by road. Drivers and passengers of freight vehicles who live in Shilaiwu and return to Ukraine in low-risk areas outside Xinjiang, with 48-hour negative report of nucleic acid detection, pass through the highway pass after nucleic acid detection, temperature measurement, code scanning and green code inspection. Return to Ukraine by plane. Before boarding the plane, the airline will check the negative report of nucleic acid test, green code of health code and temperature measurement within 48 hours, publicize and guide passengers to register for Xinjiang government affairs App and fill in the declaration for entering Xinjiang.

　　Producer Tang Yi

　　Producer Shu Fang Yiting

　　Editor Liu Junting

　 　 On September 6th, the 4th National Finals for the Selection of Cover Stars came to an end in Beijing, and many stars such as Ada, Fan Wenfang, Vincent Chiao, Ai Dai, Sun Feifei and Ren Zhong made their debut. Ada, who has always been generous in showing her good figure, appeared in a perspective lace dress with suspenders as usual, and the beauty on her chest was looming. Although he succeeded in stealing the mirror, he was approved as a pajamas.

　 　 Sun Feifei, an actress who had previously suffered from the incident of stepping on the skirt on the red carpet, was recently revealed in Weibo by her former agent Wang Wei, who revisited the incident of cosmetic surgery and stepping on the skirt door that year, saying that "the cosmetic surgery was completely unrecognizable and deliberately made the skirt door herself", and even claimed that she was threatened by Sun Feifei for this. When attending the event on the 6th, I don’t know whether it was influenced by this matter. Sun Feifei changed her sexy route and wrapped her chest tightly.

　 　 After a series of intense performances and competitions, the final winner of the day’s finals was selected. It is reported that the champion will be on the cover of fashion magazines together with sexy hostess Ada.

The 618 event is in full swing, and both JD.COM and Tmall have already started pre-sales. Because the whole span of the 618 activity is still very long, many friends don’t know what the whole time rhythm is. Today, this article will give you a detailed introduction.

[JD.COM 618 Activity Time Rhythm]

1. Cross-store full reduction: over 299 minus 50 yuan.

It will be opened at 20: 00 on May 31st, and the cross-store price in JD.COM will be reduced by 50 from 299. On the basis of the superposition ability of the number one Beijing Post, all-category coupons and big-promotion coupons will be superimposed, and it is also supported to be superimposed with other total price promotions.

2. Activity cycle: May 23rd to June 20th.

3. Red envelope collection:

JD.COM PLUS member super subsidy(Click here to get it)

The collection time is from May 23rd to June 18th (multiple rounds are distributed from time to time). There are five coupons in the round. The coupons are over 6,000 minus 600, over 3,000 minus 300, over 2,000 minus 150, over 1,000 minus 70 and over 400 minus 30, which are still "stackable coupons". The range of available coupons is slightly different, but digital products cover a lot.

Jing Xiang hong Bao(Click here to get it)

The first wave is distributed/used from 12: 00 on May 30th to June 8th, and the second wave is distributed/used from June 9th to 18th; During the activity, each person can receive it three times a day, with a face value of 19,618 yuan.

At the same time, through the daily task-invite friends, you can also receive 2 help red envelopes every day, the highest 6 yuan; If you continue to complete the daily tasks, you can get an extra bonus of 6.18 yuan.

4. Pre-sale period: May 23rd to 31st.

5. Get off to a good start: from 8 pm on May 31st to June 3rd.

6. Category Day: June 4th to 15th.

7. High tide: June 15th to 18th.

8. Return period: June 19th to 20th.

【Time rhythm of Tmall 618 activities】

1. Cross-store full reduction: over 300 minus 50 yuan.

During the period of 618, Tmall’s cross-store discount is 300 minus 50, Taobao’s cross-store discount is 200 minus 20, and it is not capped, which supports cross-store and cross-category use. Cross-store discount can also be combined with Tmall supermarket card.AlipayRed envelopes, etc. are superimposed.

Activity time:

The first wave is from 20: 00 on May 31st to June 3rd.

The second wave is from 20: 00 on June 15th to June 20th.

2. Activity cycle: May 26th to June 20th.

3. Click here to receive the super red envelope

Tmall will issue Super Red at 20: 00 on May 29th, and end the distribution on June 20th. May 31, June 3, June 14 and June 19 are super red plus time, and the winning rate of red envelopes during these times is as high as 90%.

It should be noted that the use time of red envelopes is divided into two stages: May 31st, 20: 00-June 3rd; June 15th from 20: 00 to June 20th.

Each user can draw once a day, complete the task up to 3 times, and the super red envelope wins the highest prize of 22,888 yuan!

4. Pre-sale period: May 26th to 31st.

5. Get off to a good start: from 8 pm on May 31st to June 3rd.

6. Category Day: June 4th to 13th.

7. Warm-up period: June 14th to 15th.

8. High tide period: June 15th to 20th.

(reporting)

Brand-new still uses the overall appearance, and the details have changed a lot. The front face of the new car is equipped with a mesh grille, which obviously enhances the sense of movement. The lines on the rising side of the waistline design create a sense of readiness, which looks very sporty. Through the use of lines, the three-dimensional sense of the tail shape is further strengthened, and the tail taillight shape also has a certain sense of advanced.

In terms of leather material decoration, the new car adopts Haval’s latest design style and layout, which is very surprising as a whole. The buttons on the steering wheel are made of leather, which has good feel and flexible operation, and can also be equipped with heating function. The front central control area is decorated with leather material, which improves the overall texture and luxury. The front row is also equipped with an automatic air conditioning control system to freely debug the most comfortable space atmosphere. And there are also good ergonomic seats.

The length of Haval Dog is 4620mm, the width of the car body reaches 1890mm and the wheelbase is 2738mm, which is quite satisfactory. In the same class, the wheelbase of Haval Dog ranks 151st. The interior space of the car is relatively spacious at the same level, the height and width of the car are ideal, and the legroom in the back row will not feel cramped, which belongs to the upper-middle level at the same level. The design of skylight also increases the subjective space feeling of front and rear passengers. Among the models of the same price and class, the trunk volume of Haval Dog ranks 170th. The storage space in the car is quite satisfactory and basically sufficient. The interior space of the luggage compartment is relatively regular, with very good longitudinal depth and high expansibility, and the space performance is generally ideal.

Haval Dog 2.0T Four-wheel Drive Pastoral Dog Edition uses a 2.0 engine, with a maximum horsepower of 238 and a peak torque of 385, matching the wet dual clutch (DCT) gearbox. It will definitely bring unforgettable control charm. Ranked 10 th among more than 800,000 SUV models.

The active/passive safety configuration of Haval Big Dog is complete, includingAutomatic parking、Zero tire pressure endurance tire、Automatic parking、Steep slope descent、hill start assist control、knee airbag、HUD head-up display、Anti-lock braking (ABS)、Braking force distribution (EBD/CBC, etc.)、Brake assist (EBA/BAS, etc.)、Traction control (ASR/TCS, etc.)、Active noise reduction、Engine start and stop、Side safety air curtain、Wireless charging of mobile phone、night vision system、LED daytime running lights、Forward reversing radar、Tire pressure monitoring、Steering wheel heating、Body stability control (ESP/DSC, etc.)、Rear reversing radar、Fatigue reminder、Remote parking、Child seat interface、Lane keeping (LKAS)Equal configuration.

Among them,Automatic parkingYou can avoid stepping on the brakes for a long time or needing to pull frequently;Steep slope descentCan safely pass through steep slope road conditions at low speed;knee airbagReduce the injury of the car interior to the occupant’s knees in the secondary collision.

In order to get a more comprehensive and objective understanding of Haval Dog, you can go to the Easy Car Haval Dog Forum and browse the messages of users who have bought the car in history.

At this year’s Guangzhou Auto Show, GAC Toyota Willanda officially launched in the world. I am personally very concerned about this car. After all, it isAnother product under TNGA architectureIn the past two years, there has never been a new car with TNGA architecture that is not amazing, so I am very concerned about Wilanda myself, and I tried to take a video for everyone at the first time, but I couldn’t squeeze into the crowd at the auto show. Forget it anyway.Everyone who pays attention to this car has also learned about the exterior and interior through various channels, but I guess there is one place that you may have missed, and that is the chassis part of Willanda that we are going to talk about in this issue.

Don’t say it right away. Let’s start talking nonsense.

The chassis we saw this time is fromGAC Toyota Willanda’s dual-engine four-wheel drive versionVisually, it is a model with relatively high configuration.

This car is made ofFront McPherson rear multi-linkThis more conventional layout, but I emphasize very much every timeWe should not only look at the layout of the chassis, but also pay more attention to its details..

What’s more special is that this carFour wheel arches are made of an uncommon wheel arch material.Wrapping with a material similar to foam and somewhat similar to resin is hard to the touch. I have never seen this material used in the wheel arch before, so I still need to wait for a test drive to know how this material works.

Let’s talk about the front suspension first. Because the chassis cover of this car has been completely removed when I arrived, we can see the whole chassis structure completely. So you can seeThe front subframe is a full-frame subframe.The part of the full-frame subframe connected to the front anti-collision beam has a very obvious material of different materials, that is, the anti-collision energy-absorbing box.The energy-absorbing box part adopts wave design, which can effectively disperse the impact force of collision.

butThe rear suspension part adopts E-shaped multi-link structure, and the swing arm part is basically made of steel.This is also close to an expectation at this level. The most noteworthy part of the rear suspension is the dazzling silver in the middle. Yes, that is one of the four-wheel drive versions of the Willanda hybrid model.E-four four-wheel drive system, this four-wheel drive system does not need mechanical structure to transmit power, but uses pure electric drive, and the ratio of front and rear drive reaches 20:80, which means that most of this car still relies on rear wheel drive. This E-four system is also a new product under the framework of Toyota TNGA.I am very much looking forward to its performance.

There are three four-wheel drive systems in this car, namely DTC four-wheel drive, DTV four-wheel drive and this E-four electronic four-wheel drive that we actually shot.Among them, DTV, a four-wheel drive system, can not only realize the power distribution of the front and rear wheels at 50:50, but also realize the power distribution of the left and right front and rear wheels at 0: 100: 100-0. This four-wheel drive system can achieve higher driving safety and maneuverability under complicated road conditions, which is similar to the torque distribution system provided by ZF that we used to carry in BMW X5 and X6, but Toyota has developed this one by itself. These three four-wheel drive technologies are all urban four-wheel drive technologies that I think are worth talking about. I hope I can take them out separately and talk to interested friends in later videos ~

Guangzhou Automobile Toyota Willanda can be said to be a model that I am very much looking forward to testing recently. I know very well what surprises this heavy-duty model of Guangzhou Automobile Toyota will have for me next year, at least so far.Looking at the chassis, the materials of this high-equipped hybrid four-wheel drive car are still very sufficient.As for the use of new technologies and the medium-sized SUV built by GA-K, what is it? Let’s look forward to our test drive later.

Zhangjiang area of China (Shanghai) Pilot Free Trade Zone, shot on September 10th. Xinhua News Agency reporter Tang Yushe

　　Xinhua News Agency, Beijing, December 13th, China annual economic decision-making meeting with the highest specifications — — The Central Economic Work Conference was held a few days ago, which laid out the key tasks of economic work next year, focused on economic construction and high-quality development, emphasized consolidating and enhancing the positive trend of economic recovery, and issued new signals such as "striving for progress in stability, promoting stability with progress, establishing first and then breaking".

　　Zhao Xijun, co-dean of China Capital Market Research Institute of Renmin University of China, believes that the change from "keeping the word steady, striving for progress in stability" to "striving for progress in stability, promoting stability with progress, and breaking it first" shows that the central government’s understanding of economic work is more systematic, perfect and overall, and it has grasped the relationship between stability and progress, dynamic and static in economic development after the epidemic, and better promoted the effective improvement of economic quality and reasonable growth of quantity.

　　“‘ Establish first and then break ’ It is to let the growth factors be released more actively. " Zhang Liqun, a researcher at the Macroeconomic Research Department of the State Council Development Research Center, said that for some new forces, we should encourage them to grow up first, find problems in their growth, standardize them in their growth, and make them go better.

　　The 20th National Congress of the Communist Party of China drew a grand blueprint for comprehensively promoting the great rejuvenation of the Chinese nation with Chinese modernization, emphasizing that high-quality development is the primary task of building a socialist modern country in an all-round way.

　　The Central Economic Work Conference laid out the key points for promoting high-quality development next year from nine aspects: leading the construction of a modern industrial system with scientific and technological innovation, focusing on expanding domestic demand, deepening reforms in key areas, expanding high-level opening to the outside world, continuously and effectively preventing and resolving risks in key areas, persistently doing a good job in the work of agriculture, rural areas and farmers, promoting urban-rural integration and coordinated regional development, deepening the construction of ecological civilization and green and low-carbon development, and effectively safeguarding and improving people’s livelihood.

　　"This shows that China does not rely on scale expansion and relatively low added value to promote economic growth, but will achieve economic recovery in high-quality development." Zhao Xijun said.

　　Zhang Liqun said that one of the characteristics of China’s economy this year is that it has gradually emerged from difficulties and achieved remarkable economic recovery. By increasing policy support, the government has improved the weak links of economic development and stabilized the expectations of investment and consumers.

　　On November 27th, in Chongqing Changan Crossing Vehicle Co., Ltd., located in Wanzhou District, Chongqing, the staff were busy on the production line. Xinhua News Agency reporter Tang Yushe

　　In the first three quarters of this year, China’s GDP increased by 5.2% year-on-year, which still ranks among the top in the world’s major economies, laying a solid foundation for achieving the expected growth target of around 5% for the whole year.

　　At present, China’s economic operation continues to improve, its innovation momentum is constantly enhanced, and breakthroughs have been made in tackling key core technologies. Many experts interviewed here pointed out that the Central Economic Work Conference placed "scientific and technological innovation" in an important position.

　　Bin Chen, an associate researcher in the Economic Forecasting Department of the State Information Center, analyzed that next year will be a crucial year for China to implement the "14th Five-Year Plan", and China will take further measures to promote market players to lay out new economic tracks and new formats.　

　　The Central Economic Work Conference proposed to strengthen the countercyclical and cross-cyclical adjustment of macro policies, continue to implement a proactive fiscal policy and a prudent monetary policy, and strengthen the innovation and coordination of policy tools. It also emphasized that proactive fiscal policies should be moderately strengthened, quality improved and efficiency improved, and prudent monetary policies should be flexible, moderate, accurate and effective.

　　Zhang Yansheng, the chief researcher of China Center for International Economic Exchanges, believes that the word "moderate" means that China will not carry out strong stimulus like some developed countries, but will pay attention to the quality and efficiency of policies, emphasize the pertinence, and promote economic development with more precise and appropriate efforts.

　　On July 6, 2023, the World Artificial Intelligence Conference kicked off in Shanghai World Expo Center, where visitors interacted with the soft humanoid intelligent service robot at the Dalai booth. Xinhua News Agency (photo by Li Xinyi)

　　Public opinion is generally concerned about the formulation of "enhancing the consistency of macro-policy orientation" at the meeting — — Strengthen the coordination of fiscal, monetary, employment, industrial, regional, scientific and technological, environmental protection and other policies, incorporate non-economic policies into the consistency assessment of macro-policy orientation, strengthen policy coordination, and ensure the same direction and form a joint force.

　　Zhang Yansheng believes that this has released a signal from the central level to avoid conflicts between different policies and fully mobilize the enthusiasm of various business entities, including the private economy and the foreign-funded economy.

　　China’s economic recovery is still at a critical stage, which further promotes the economic recovery and puts forward high requirements for the implementation of macro policies. The meeting stressed that attention should be paid to grasping and handling the relationship between speed and quality, macro data and micro feelings, economic development and improvement of people’s livelihood, development and security.

　　Experts interviewed generally believe that China has a large-scale market, a complete industrial system, a large number of high-quality workers and entrepreneurs, a deeper understanding of the laws of economic work in macro policies, and strong endogenous motivation, resilience and potential for economic development. The difficulties and challenges that China has to overcome are problems in progress and troubles in development, and it is necessary to enhance confidence and confidence.

　　It has been noted that the International Monetary Fund recently raised China’s GDP growth forecast for 2023 from 5% to 5.4%, and at the same time raised its growth forecast for 2024. UBS Group AG, JPMorgan Chase and other institutions are also optimistic about China’s economic growth prospects. (Reporter Xin Guo, Zhou Wenqi, He Xiaotong, Li Yunlu)

Notice of Jiangmen Municipal Bureau of Human Resources and Social Security, Jiangmen Municipal Bureau of Finance and State Taxation Administration of The People’s Republic of China Jiangmen Municipal Taxation Bureau on Printing and Distributing the Measures for the Administration of the Floating Rate of Industrial Injury Insurance in Jiangmen City

Illustration: Illustration of floating method of industrial injury insurance rate

　 　 　I. Purpose and basis

　 　 　 　Purpose:In order to promote the prevention of work-related injuries, strengthen the management of work-related injury insurance funds and improve work-related injuries.Premium rateFloating mechanism.

　 　 　 　Policy basis:

　 　 　 　1. Regulations on Industrial Injury Insurance

　 　 　 　2. Regulations of Guangdong Province on Industrial Injury Insurance.

　 　 　 　3. Notice of the Ministry of Human Resources and Social Security and the Ministry of Finance on Adjusting the Industrial Injury Insurance Rate Policy (No.71 [2015] of the Ministry of Human Resources and Social Security)

　 　 　 　4. Notice of guangdong provincial department of human resources and social security Guangdong Provincial Department of Finance and State Taxation Administration of The People’s Republic of China Guangdong Provincial Taxation Bureau on Printing and Distributing the Provincial Overall Implementation Plan of Guangdong Industrial Injury Insurance Fund (Guangdong People’s Social Regulation [2019] No.20)

　 　 　 　5. Notice of guangdong provincial department of human resources and social security Guangdong Provincial Department of Finance and State Taxation Administration of The People’s Republic of China Guangdong Provincial Taxation Bureau on Relevant Matters Concerning the Implementation of Provincial Industrial Injury Insurance Industry Benchmark Rate Standard (Guangdong People’s Social Regulation [2021] No.4)

　 　 　 　Second, the scope of application

　 　 　 　In addition to the construction industry that participates in industrial injury insurance according to construction projects, these Measures shall apply to the employers (including individual industrial and commercial households with employees) that participate in industrial injury insurance within the administrative area of Jiangmen City (including three districts and four cities under its jurisdiction).

　 　 　 　Three, the industrial injury insurance industry benchmark rate standard

　 　 　 　Implementation in our cityProvincial levelCoordinate the benchmark rate standard of industrial injury insurance industry.

　 　 　 　The standard rates of the first to eighth industries are 0.2%, 0.4%, 0.6%, 0.8%, 0.9%, 1.0%, 1.2% and 1.4% respectively.

According to the national and provincial arrangements,To April 30, 2022, the employer’s work-related injury insurance premium rate unified stage in our city.Down by 50%.

　 　 　 　Fourth, the basic concepts

　 　 　 　Industrial injury insurance rate floating, refers to the social security agencies on the basis of the employer’s implementation of the industry benchmark rate to pay work-related injury insurance premiums, according to the employer’s expenditure rate of work-related injury insurance premiums in the previous natural year (January 1 to December 31), production safety and occupational disease hazards, and other factors, the proportion of work-related injury insurance contributions that should be floating in the current social security year (July 1 of that year to June 30 of the following year) is approved.

　 　 　 　Expenditure rate of industrial injury insurance premium, refers to the last natural year, the industrial injury insurance fund actually paid to the employer’s work-related injury insurance benefits (based on the time when the social security agency paid the work-related injury insurance benefits) accounted for the proportion of the actual work-related injury insurance premiums paid by the unit. The employer who is not insured for the first time in the previous natural year and whose payment month is less than one year shall calculate the expenditure rate of work-related injury insurance premium in the previous natural year according to the actual payment month.

　 　 　 　Payment method of industrial injury insurance:Work-related injury insurance is paid by the employer, but not by individual employees.

　 　 　 　The amount of work-related injury insurance payment paid by the employer = the total wages of the employees of the unit × the unit payment rate.

　 　 　 　Five, not included in the statistical scope of work-related injury insurance expense rate.

　 　 　 　1 employees are injured in activities such as emergency rescue and disaster relief to safeguard national interests and public interests;

　 　 　 　2. The employee was formerly in the army, was injured and disabled due to war or work, and has obtained a revolutionary disabled soldier’s certificate, and the old injury recurred after going to the employer;

　 　 　 　3. Workers are infected with epidemic diseases when they are assigned by the employing unit to work in places declared as epidemic areas according to law.
　　 　 　 　　　Six, industrial injury insurance rate floating standard

　 　 　 　A kind of industryThe floating standard of the employer’s industrial injury insurance rate:

　 　 　 　1. The employer whose expenditure rate of work-related injury insurance premium in the previous natural year is below 100% (including 100%) shall pay the work-related injury insurance premium in the social security year according to the industry benchmark rate;

　 　 　 　2. The employer whose expenditure rate of work-related injury insurance premium in the previous natural year is more than 100% and less than 120% (including 120%) shall pay the work-related injury insurance premium in the current social security year according to 120% of the benchmark rate of this industry (up one step);

　 　 　 　3. The employer whose expenditure rate of work-related injury insurance premium in the previous natural year is more than 120% shall pay the work-related injury insurance premium in the current social security year according to 150% of the benchmark rate of this industry (floating second gear).

　 　 　 　Class II to Class VIII industriesThe floating standard of the employer’s industrial injury insurance rate:

　 　 　 　1. The employer whose expenditure rate of work-related injury insurance premium in the previous natural year was below 10% (including 10%) shall pay the work-related injury insurance premium in the current social security year according to 50% of the benchmark rate of this industry (down the second gear);

　 　 　 　2. The employer whose expenditure rate of work-related injury insurance premium in the previous natural year is more than 10% and less than 50% (including 50%) shall pay the work-related injury insurance premium in the current social security year according to 80% of the industry benchmark rate (down one file);

　 　 　 　3. The employer whose expenditure rate of work-related injury insurance premium in the previous natural year is more than 50% and less than 100% (including 100%) shall pay the work-related injury insurance premium in the current social security year according to the industry benchmark rate;

　 　 　 　4. The employer whose expenditure rate of work-related injury insurance premium in the previous natural year is more than 100% and less than 120% (including 120%) shall pay the work-related injury insurance premium in the current social security year according to 120% of the benchmark rate of this industry (up one step);

　 　 　 　5. The employer whose expenditure rate of work-related injury insurance premium in the previous natural year is more than 120% shall pay the work-related injury insurance premium in the current social security year according to 150% of the benchmark rate of this industry (floating second gear).

　 　 　 　Seven, other floating factors of industrial injury insurance rate.

　 　 　 　1. For the first-class and second-class safety production standardization within the validity period, the employer will reduce the work-related injury insurance rate by 0.03 percentage points on the basis of the original approved work-related injury insurance rate, but the reduced payment rate is not lower than the benchmark rate of a risk industry.

　 　 　 　2. If the employer is insured for the first time in our city in the last natural year and the payment period is less than one year, it will not participate in the floating rate of that year, and still pay according to the industry benchmark rate.

　 　 　 　3. In the last natural year, it was listed as a joint disciplinary object in the field of safety production, and then it was raised by two rates; If the floating rate has reached the highest rate in the industry, it will no longer float.

　 　 　 　Eight, industrial injury insurance rate floating cycle

　 　 　 　The employer’s industrial injury insurance rate fluctuates.In principle, it should be adjusted once a year.The social security agency shall evaluate the industrial injury risk of each employer every year to determine whether the rate is floating or not. When the employer floats the rate again, it still floats on the basis of the industry benchmark rate.

　 　 　 　employerChange the industrial injury risk category, in the process of change.Next monthPay according to the newly approved rate, but the original floating rate level will continue to be implemented during the floating period.

　 　 　 　employerObtain the certificate of standardization grade of safety production.After receiving the original or photocopy of the relevant certificate submitted by the social security agency.Next monthEnjoy the rate reduction.

　 　 　 　IX. Implementation Time　

　 　 　 　The "Administrative Measures" will be implemented from March 1, 2022 and will be valid for five years.

　 　 　 　If you need to know more about the Measures for the Administration of Industrial Injury Insurance Rate Fluctuation in Jiangmen City, please call the Industrial Injury Insurance Section of Jiangmen Human Resources and Social Security Bureau at 0750-3935236.

　jiangmen human resources and social security bureau

February 20, 2022

Yes, the 2021 Tesla Model Y has automatic parking function. This function can be realized by the automatic driving hardware and software of the vehicle, so that the driver can complete the parking operation without touching the vehicle.

To use the automatic parking function, you need to first ensure that your Model Y has been upgraded to the latest firmware version. Then, you can follow these steps:

1. Find the automatic parking button (an icon with an arrow pointing to a square) on the steering wheel and press it.

2. Park the vehicle in a position suitable for automatic parking, and ensure that the vehicle is aligned with the space you want to park.

3. Put the gear lever into the "D" or "R" gear.

4. After the automatic parking function is activated, the vehicle will automatically find a suitable parking space and carry out parking operation. During parking, the vehicle will maintain a stable speed and accelerate or decelerate when necessary.

5. When the vehicle is successfully parked in the parking space, you can choose to exit the automatic parking mode and control the vehicle manually.

Please note that although the automatic parking function can greatly simplify the parking process, the driver still needs to be vigilant and ready to take over the control of the vehicle at any time.

　　Hundred years is the first! Xinhua News Agency’s WeChat launched a new media report on the Spring Festival customs of "Little New Painting New Year", which will take you back to China’s traditional customs culture and experience the strong flavor of the year from the early years to the 15th day of the first month.

　　Today is the 28th of the twelfth lunar month. There is a saying in the year: "On the 28th of the twelfth lunar month, cakes and steamed buns are decorated with decals".

　　The so-called decals are the posting of New Year pictures, Spring Festival couplets, window grilles and various divine codes. Among them, the custom of pasting Spring Festival couplets originated from the ancient "Taofu". The ancients used peach wood as a wood to ward off evil spirits. The Canon of Art said, "Those who are peach trees are the essence of five trees, so those who are tired of evil spirits are also."

　　In the Five Dynasties, Meng Changya, the monarch of the post-Shu Dynasty, was good at literature. Every year, he ordered people to inscribe Taofu, which became the origin of Spring Festival couplets in later generations. The inscription on Taofu, "New Year’s Qing Yu, JiajieNo. Changchun", became the first "Spring Festival couplets" in recorded China history.

　　Later, with the advent of papermaking, the custom of posting Spring Festival couplets with red paper instead of mahogany appeared.

　　On the 26th and 27th of the twelfth lunar month, meat is prepared for the Chinese New Year. On the 28th, it’s time to prepare pasta. In the past, there was no modern and convenient baking powder. Ordinary flour was made a few days in advance, and it was easy to go bad. Only flour was not bad, so it was made on the 28th to prepare the staple food from the first day of the first month to the fifth day of the first month. At the same time, this is also because the old custom holds that "you can’t steam steamed buns with fire during the first day to the fifth day."

Huang Xie, the Spring Shenjun in the hit drama legend of miyue. The pictures in this article are all from the Internet.

The characters in the recent hit drama "legend of miyue" are actually related to Shanghai. A few days ago, some netizens found a famous brand near the Huang Du Cultural Activity Center in Anting Town, Jiading District, which read the relationship between Huang Du and Huang Xie. Some netizens even suggested that Mi Yue’s boyfriend was the ancestor of Shanghainese. In this regard, experts from Shanghai Academy of Social Sciences said that there is a big age difference between Chun Shenjun, Huang Xie and Mi Yue, and literary and artistic works have fictional elements, but Huang Xie does have a close relationship with Shanghai.

Shanghai is called "Shen" for Huang Xie?

Chun Shenjun, Wei Wuji,, Ping Yuanjun, Zhao Sheng, and Tian Wen, Meng Changjun, Qi, are also called "Four Childes of the Warring States".

A few days ago, some netizens found a famous brand near the Huang Du Cultural Activity Center in Anting Town, Jiading, with the origin of Huang Du written on it.

The name tag says: In 355 BC, when the State of Chu destroyed Yue, it became the fief of Huang Xie, the king of Chunshen. Later, Chun Shenjun was ordered to attack the State of Qin, and once led a great army to ferry across the river at "Lujiaopu", which is the eastern head of Huang Du Town today. Later generations also renamed Lu Jiaopu "Huang Xie Ferry" because of this incident, and it gradually evolved into "Huang Du" after being passed down from generation to generation.

Not only that, but also legend of miyue fans quoted literature saying that Shanghai’s abbreviation "Shen" is also related to Huang Xie’s title of "Spring Shenjun". Shanghai belonged to Wu in the Spring and Autumn Period, and then to Chu in the Warring States Period. King Xiao of Chu named Huang Xie, the prime minister of Chu, as the Spring Shenjun, and Shanghai was his fief. Legend has it that Huang Xie ordered people to clear the great river crossing the border. This river was called Huangpu River or ChunJiang Shen, and this place was called "Shen", which is the origin of Shanghai’s abbreviation "Shen".

There is also a view that Huang Xie, the Spring Shenjun, is a "local god" in Shanghai, and he has made outstanding achievements in water control in Wudi, and is regarded as a water god. After the eastern sea area of Shanghai silted up into land and the Huangpu River took shape, people carried out the water god Chun Shenjun and called their mother rivers Huang Xie Pu and Chun Jiang Shen to suppress the water monster. In addition, Chun Shenjun was sealed twice, which opened the pre-Qin civilization in Shanghai. "Shanghai Culture" has also left an extremely precious cultural heritage for the city of Shanghai.

However, there are also views that Huang Xie’s age and the landform of Shanghai at that time make it impossible for him to come to Shanghai, and Shanghai is not listed in the fief of Huang Xie.

The names of Huang Xie Pu and ChunJiang Shen are all true history.

"Judging from the historical records, Huang Xie, a spring Shen Jun, has a close relationship with Shanghai." Zhang Sheng, an assistant researcher at the Institute of History of the Shanghai Academy of Social Sciences, said in an interview with The Paper (www.thepaper.cn) yesterday that the historical records he was referring to were mainly related records of Huang Xie in Historical Records, Biography of Chun Shenjun, etc.

Zhang Sheng pointed out that the fief of Huang Xie’s Spring Shenjun was mainly in Huaibei area at first, and later it was moved to Jiangdong area because of the hegemony of Qi and Chu, and Jiangdong area was generally regarded as the ancient Wu land, and it was generally believed that this area included the present Shanghai.

Zhang Sheng said that the age of Huang Xie was artistically treated in legend of miyue, but there is a logic that can be affirmed, that is, the achievements of Chun Shenjun in water control, the names of Huang Xie Pu and Chun Jiang Shen, and the fact that Shanghai is called "Shen" for short are all relatively real history.

"There is a folk children’s song that has been circulated so far: bam bam bam, bam bam, my grandfather and mother went to open the Huangpu River, and then they opened the spring pond. The leading grandfather is Chun Shenjun, who lives in Huangnibang, Xian Village." Zhang Sheng said that children’s songs and the famous brand of "Huang Du" in Jiading District of Shanghai also showed the close relationship between Chunshenjun Huang Xie and Shanghai.